Jiangsu Xingrui Tools CO.,LTD
Professional Tools Supplier In China.
Add to Cart
1. Complete hole drilling, tapping, deburring and countersinking in one operation with power drill saves labor and time.
2. Self-centering point, do not need assistant center drilling or center punching.
3. Taps produce internal threads in previously formed holes and can be used in machines (such as drill presses) or with
hand tools.
4. Modified bottoming chamfer has additional length to reduce chip load, add tool life, and permit higher tapping speeds.
5. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and
toughness for wear resistance.
6. Made from HSS with titanium coated, high hardness and rust resistance, durable and long service life.
7. Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron, etc.
DIN5157,for metric-ISO thread DIN13,Tolerance 6H=is02
M2 HSS
M35 HSS -E,Coatings,avaliable for specified requirements
2 of set:Taper and Plug.
For through holes and blind holes.
| Product Name | DIN5157 G hand taps sets |
| Material: | HSS-4241;HSS-4341;HSS-M2;HSS-M35 |
| Surface: | white finished. |
| Application | suitable for alloyed and unalloyed steel up to approx. 850 N/mm², cast steels, malleable cast iron, brass, aluminium and copper |
size
| SIZE | OVERALL LENGTH | THREAD LENGTH |
| G1/8 | 63 | 20 |
| G1/4 | 70 | 22 |
| G3/8 | 70 | 22 |
| G1/2 | 80 | 22 |
| G5/8 | 80 | 22 |
| G3/4 | 90 | 22 |
| G7/8 | 90 | 22 |
| G1 | 100 | 25 |
| G1-1/8 | 125 | 40 |
| G1-1/4 | 125 | 40 |
| G1-3/8 | 140 | 40 |
| G1-1/2 | 140 | 40 |
| G1-5/8 | 140 | 40 |
| G1-3/4 | 140 | 40 |
| G2 | 160 | 40 |
| G2-1/4 | 160 | 40 |
| G2-1/2 | 160 | 40 |
| G2-3/4 | 160 | 40 |
| G3 | 160 | 40 |
| G3-1/2 | 180 | 45 |
| G4 | 180 | 45 |
